Barefoot® anti-fatigue mats were designed to increase worker comfort and productivity for years by reducing fatigue caused by standing on hard surfaces. These ergonomic floor mats use quality rubber found in athletic shoes without cheap fillers that are found in most imported floor mats. Our anti-fatigue mats have two surface styles and three material types from which to choose (see below). Interlocking tabs allow our mats to be bonded into a variety of lengths and shapes to fit your exact needs. When you factor in both comfort and durability, you will find that the Barefoot mats are the most cost effective anti-fatigue mats sold today. Choose the anti-fatigue mat that best addresses the specific requirements of your workplace and be prepared for years of increased employee productivity.
Barefoot anti-fatigue mats are made in the USA

Surface Styles:
Solid Surface-Use solid rubber anti-fatigue mats on floors that are dry.
Drain Thru Surface-Use drain thru anti-fatigue mats in areas that come in contact with liquids such as oils, cutting and lubricating fluids, chemicals and water. Drain holes keep liquid off the top of the mat.

Material Types:
Standard mats use high grade EPDM rubber. Excellent for most all applications that do not come in contact with petroleum derivatives and harsh chemicals. UV and ozone resistant.
Nitrile mats use quality blended nitrile rubber with a high degree of oil resistance. Excellent for manufacturing plants and machine shops where exposure to shop oils can degrade standard rubber mats.
ESD/Conductive mats use specially compounded EPDM rubber for the electronics industry. Each module is certified to be 1 x 10 to the 4th to 1 x 10 to the 6th ohms, surface to ground resistance. The ESD version of Barefoot® anti-fatigue mat has the same ergonomic qualities as the Standard Barefoot® floor mat. It also has certain specified electrical properties required by the electronics industry. Each Barefoot® ESD anti-fatigue mat is tested six times before it is certified and packaged.